Re: how to configure mellanox 4001f so servers can communicate internally

Hi Ozgur,

Basically, there is no configuration needed on the switch for it to connect to the servers in the chassis, those servers of course needs to be equipped with ConnectX®-3 InfiniBand dual port Mezzanine I/O cards

For your reference I'm adding the below links:

http://www.mellanox.com/pdf/prod_ib_switch_systems/SwitchX_Blade_Switch_M4001FTQ_user_manual_Rev_1_2.pdf

http://www.mellanox.com/pdf/prod_adapter_cards/ConnectX-3_Dual_Port_40_Gbs_and_56_Gbs_IO_card_for_Dell_User_Manual.pdf

I would also make sure you have a subnet manager running in the network (probably on of of the blade serves)