Hi all!
I recently bought on ebay the switch mentioned in the title, and it works just SDR instead of DDR. Searching here suggested that it may be a firmware issue, therefore i checked the
version of the firmware installed on the switched. After installing mft tools 2.7.1 (I read somewhere here that they were working fine) on my centos 6 box i queried the firmware
using spark. The installed fw is v0.8.6
After some googling I finally found the 1.0.5 fw image for this switch
When I finally ran spark -d **** -i firmware.ISR9024D.img b
it failed saying something like:
verifying secondary image failed:
address 0x2003 : expected 0xa0 found 0x00
My conclusion is that spark didn't actually burn anything on the EEPROM so my question is:
is it possible to do what I want to do or is the switch's EEPROM somehow locked?
Thanks!