Hello,
we use Xenserver 6.2 SP1 with the following NIC:
Mellanox Technologies MT26468 [ConnectX EN 10GigE, PCIe 2.0 5GT/s Virtualization+] (Hewlett-Packard Company HP NC542m Dual Port Flex-10 10GbE BLc Adapter)
The problem is. that we are not able to Upgrade tp Xenserver 6.5 because the setup stops after Keyboard selection (see attached picture)
if we deactivate the NIC in BIOS Setup works so it seems there is a problem with the NOC under Xenserver 6.5...
is there a driver (Sublemental Pack) for Xenserver 6.5 so that we can include the driver at setup?
robert