Environment:
IB driver:
Mellanox OFED for Windows - WinOF VPI Rev 5.10.50000
Windows Client 8.1
Hardware (output from vstat):
hca_idx=0
uplink={BUS=PCI_E Gen3, SPEED=8.0 Gbps, WIDTH=x8, CAPS=8.0*x8}
MSI-X={ENABLED=1, SUPPORTED=128, GRANTED=6, ALL_MASKED=N}
vendor_id=0x02c9
vendor_part_id=4099
hw_ver=0x0
fw_ver=2.35.5100
PSID=MT_1060110018
node_guid=e41d:2d03:0075:36d0
num_phys_ports=1
port=1
port_guid=e41d:2d03:0075:36d1
port_state=PORT_ACTIVE (4)
link_speed=10.00 Gbps
link_width=4x (2)
rate=40.00 Gbps
real_rate=32.00 Gbps (QDR)
port_phys_state=LINK_UP (5)
active_speed=10.00 Gbps
sm_lid=0x0003
port_lid=0x0001
port_lmc=0x0
transport=IB
max_mtu=4096 (5)
active_mtu=4096 (5)
GID[0]=fe80:0000:0000:0000:e41d:2d03:0075:36d1
Network:
2 desktops with 1 HCA adapter each
OpenSM (its own output):
-------------------------------------------------
OpenSM 3.3.11 UMAD
Command Line Arguments:
verbose option -D = 0xb
d level = 0x2
Debug mode: Force Log Flush
Creating new log file
Log file max size is 1 MBytes
-------------------------------------------------
OpenSM 3.3.11 UMAD
Entering DISCOVERING state
Using default GUID 0xe41d2d03006f0cb1
Entering MASTER state
SUBNET UP
osm_log: log file exceeds the limit 1048576. Truncating.
...
-------------------------------------------------