Hi Everyone,
Thought i would ask question here to see if anyone has seen this before or give me some more pointers.
So i have a SX1016 configured with a port channel trunk to a Brocade SX800
On the SX1016 end port channel is configured as hybrid so its sending both untagged and tagged vlans.
Trunk on the Brocade is configured the same.
Attached to the SX1016 are windows 2012 servers with 10g uplinks. These ports are set to hybrid as well.
The issue is i have several machines on vlan 2 and vlan 3 that are sending out requests for dhcp. The replies they are getting back are for the default vlan.
This is where it gets interesting as even though the virtual machine is on vlan 2 it has an ip from the default vlan and is communicating over the trunk as though it was in the default vlan.
What i see from the SX1016 side is the packet coming in off the trunk in vlan 2 and then appearing on the default vlan.
Any thought?
Regards, Rob