Yairi, that is the wrong answer. I actually was sent a console cable "construction" sheet by mellanox, which states that you are to cross pins 2 & 3 for TX/RX and pin5 is used for ground. In my case with my 9024m this also did not work, and I needed to cross pins 2 & 4. I found this out by using a program called "realterm" that showed me transmitting, but nothing coming in on the receiving pin, but there was data being received on the "ring" pin. Through the process of elimination, I found that pins 2 & 4 needed to be crossed and it worked.
↧