Re: Can ConnectX-3 EN work with libvma?
Hello, Yes, you need at least the ethernet driver and low level driver - mlx4_en and mlx4_core which is why it looks to me that there's something wrong in your installation. it is not related to VMA...
View ArticleRe: Can ConnectX-3 EN work with libvma?
mlx4_en and mlx4_core are loaded by mlnx-en-2.4-1.0.0.1 which is installed before OFED. After unload them and uninstall mlnx-en-2.4-1.0.0.1, it works.Thanks very much
View ArticleRe: LED light indicator on connectX-3 - possibly dead port
Paul, you can now buy a LinkX Transceiver or Cable that will allow interoperability between Mellanox and Cisco equipment. Mellanox and ProLabs (UK) Ltd will launch a new range of LinkX prioducts that...
View ArticleRe: 40GE Cisco compatibility question
Hi Chris, I was just trawling through the questions on this site and found your question about interoperability between Cisco and Mellanox switches. This problem is now solved by the introduction of...
View ArticleSX6012 - couple of questions.
Hi all, I got a nice deal on a couple of SX6012 switches along with some ConnectX VPI cards but have a couple of questions about them. I should note I don't have them here yet, they are in transport...
View ArticleClik here to view.
Re: SX6012 - couple of questions.
Hi P D Answering your question inline: Can I "stack" them both together in some way so I could provide redundancy to the dualported host cards? Yes - using MLAG - see HowTo Configure MLAG on...
View ArticleEthernet Switch: which MIB to read for learned unicast MAC addresses?
Hi, I have a sx1036 EN switch (but will be getting 1710s soon)... with 3.4 OS. # snmpget -v2c -c private 10.0.128.85 SNMPv2-MIB::sysDescr.0 SNMPv2-MIB::sysDescr.0 = STRING: Mellanox...
View ArticleClik here to view.
Server 2012r2, connect x2, virtual adapter (none default partition) doesn't...
I have 2 windows 2012r2 with a dual port connect x2 card in each, I have created 2 partitions, one on each port, so creating 2 virtual adapters. After rebooting, these virtual adapters do not detect a...
View ArticleClik here to view.
RDMA with native IB addressing
Tarick Bedeir gave an example on how to establish an RDMA connection (using RDMA-CM) between two applications in the...
View ArticleDCBx willing with Connectx-3 module
I want the storage spaces server to receive the DCB parameters from the switch. Is this supported with the Connectx-3 CNA and how is it configured in that case. All forums say that dcbx is not...
View ArticleRe: How to upgrade to latest version of MLNX-OS ?
Hello Anand, the SX6012F I have appears to be a special version for EMC²It has a special BOOT software, which lets it behave like an unmanaged SX6005.There is no MLNX-OS installed, nor is it...
View ArticleRe: How to upgrade to latest version of MLNX-OS ?
This is not a standard switch. I would have to refer you back to EMC for support on this switch. We dont provide a boot software, we have an img file for systems that already have the OS Boot loader.
View ArticleClik here to view.
Re: How to upgrade to latest version of MLNX-OS ?
Hi Anand, I have this file you refer to, you remember ?If this file contains the boot loader for the MLNX-OS, then how can I install it ?Please advise. speedy
View ArticleLS-S2309TP-EI-DC vs LS-S2309TP-EI-AC
What's the difference between LS-S2309TP-EI-DC and LS-S2309TP-EI-AC?The big difference is LS-S2309TP-EI-DC with DC power supply while LS-S2309TP-EI-AC has AC power supply.
View Articlemap-by dist not working in HPC-X?
I have noticed that the HPC-X MPI does not support the -map-by dist:<hca_name> any longer.Even when rebuilding it I don't get it to compile in the "dist" value for this option. I suspect, but I...
View ArticleRe: map-by dist not working in HPC-X?
Interestingly enough, the following does not cause an error although I think it is equivalent. -mca rmaps_base_mapping_policy dist:span -mca rmaps_dist_device ${hca_dev} As I understand it this should...
View ArticleRe: map-by dist not working in HPC-X?
Further googling shows that the syntax I used initially apparently is not the documented way to specify this mapping any longer. Although no obvious pointers as to when it changed and why. Suggested...
View ArticleRe: Ethernet Switch: which MIB to read for learned unicast MAC addresses?
Hi Dan,This table on the MIB is not supported. Ophir.
View ArticleRe: Ethernet Switch: which MIB to read for learned unicast MAC addresses?
Thanks for the reply Ophir! Is there any "programmatic" way to get this from the switch -- aside from an expect script that issues CLI commands and parses the output? Thanks again!Dan
View ArticleRe: Ethernet Switch: which MIB to read for learned unicast MAC addresses?
Hi Dan,let me check that for you.We have some kind of REST interface, I need to check if this can retrieved via this interface. Thanks,Ophir.
View Article