Clik here to view.
Re: Connect-IB MTT
Hello,Have you tried seeing that you cannot actually allocate DMA of the requires size with the default settings ? The parameters in mlx4 (ConnectX-3Pro and below) were configurable as the default...
View ArticleSubnet manager between different switch brand
Hello, into my infiniband cluster infrastructure i have a Intel IB switch (Intel True Scale Edge Switch 12300), i bough a new switch Mellanox voltaire 4036 and connected to the intel switch,actually...
View ArticleClik here to view.
Re: my codes need to include umad.h and mad.h, but I can't find them on...
HiPlease notice that under WinOF 5.1 driver and also ofed_3_2_win7x64 under the headers are located under: libibmad , libibumadib_mad.hibumad.h...
View ArticleRe: how i get powershell module
Hi There, Our WinOFED driver for Windows comes with added support for various cmdlets from Powershell by using the default installation
View ArticleRe: windows server infiniband ibping fail
Hi, Sure, thanks! vstat from machine running subnet manager: vstat from other machine: ibping error from machine running subnet manager: ibping error from other machine:
View ArticleClik here to view.
Re: Can I use Cisco BiDi QSFP's in ConnectX3 or 4 NIC's?
ConnectX4 doesn't have this limitation
View ArticleClik here to view.
Re: Connect-IB driver trace info
I found a cool feature on-demand paging in the user manual. This features seems to be a good fit for my application. However, while I am evaluating the performance of on-demand paging, I see there is a...
View Articlemlnx_add_kernel_support.sh and magic version errors.
I have successfully built and installed ofed 3.2-2.0.0.0 on an Oracle Enterprise Linux 6.7 system. I tested this ofed installation in ethernet emulation mode with iperf3 and a ConnectX-4 port looping...
View ArticleClik here to view.
Re: FlexBoot linux IBoIP
I am also trying to boot via PXE on Infiniband with ConnectIB card and I have found out, there are available Driver Update disc for Ethernet on FlexBoot site: DUD MLNX_EN for RHEL7.1 Driver Is there...
View ArticleISR 9024S-M can not take admin password
I have a ISR 9024S-M which can not take admin password. Looks like the partition is fed up by log file. Is there any way to free the partition or how to factory reset it? Please help!Here is the screen...
View ArticleRe: ISR 9024S-M can not take admin password
PPCBoot 1.1.6 (Nov 16 2004 - 08:21:51) CPU: IBM PowerPC 440 Rev. CBoard: Artesyn Technologies PM/PPC-440gp Artesyn Monitor Version 1.5.0 VCO: 800 MHz CPU: 400 MHz PLB: 133...
View ArticleRe: I have problem porting my RDMA application from InfiniBand(Mellanox...
Hi, I recommend opening a ticket to support@mellanox.com and provide a code snippet of what you're trying to do so it will go into the appropriate resource.
View ArticleRe: M2401G Switch Redundancy?
the first 15 ports are the external ports of the switch blade. it's not editable
View ArticleRe: Subnet manager between different switch brand
A couple of comments on this: 1. SM Priority 0 is lowest priority and 15 is highest. You might want to set Intel switch SM to be higher SM priority than Mellanox/Voltaire switch SM priority. 2. Best...
View ArticleRe: OpenMPI MXM problem
Does the same failure if pre-compiled OpenMPI used?Did you try to avoid LSF and run mpirun directly? Maybe allocate nodes used LSF and the from the other terminal run the MPI job.Try to add...
View ArticleClik here to view.
Re: not able to compile the kernel client module
Your module is compiling against the vendor kernel sources instead of MOFED. You might take a look on the other projects that compile against MOFED, for example Lustre.
View ArticleRe: OpenMPI MXM problem
Does the same failure if pre-compiled OpenMPI used? Yes - that is what I meant by running HPC-X Did you try to avoid LSF and run mpirun directly? Maybe allocate nodes usedLSF and the from the other...
View ArticleRe: mlnx_add_kernel_support.sh and magic version errors.
Hi Nathan, Did you actually download and install the MFT package version 4.3.0 for Linux, which is required if you wanted to use the MFT utilities.http://www.mellanox.com/page/mlxup_firmware_toolNOTE:...
View ArticleClik here to view.
Re: mlnx_add_kernel_support.sh and magic version errors.
I didn't download the MFT package. I must have used the MFT supplied in MLNX_OFED_LINUX-3.2-2.0.0.0-oel7.1-x86_64.tgz. It looks like I have mft 4.3# mst version**mst, mft 4.3.0-25, built on Jan 25...
View ArticleNIC always in initializing state after update firmware
I have a Connect-IB card and when I am installing the latest MOFED 3.2. The installation step automatically update the firmware version to 10.14.2036. But after I reboot my system, the card state is...
View Article