Re: I have a trouble that I can't change Ethernet to Infiniband.
Hi! My "ibv_devinfo" and "flint". sangmuk@sclab1:~$ ibv_devinfohca_id: mlx4_0 transport: InfiniBand (0) fw_ver: 2.36.5000 node_guid:...
View ArticleRe: I have a trouble that I can't change Ethernet to Infiniband.
Thanks, Do you have MLNX_OFED installed?
View ArticleRe: Observing long delay with RoCE using ConnectX-4 and SN2700
Hi, Please open a support case at support@mellanox.com and request to get the MLNX-OS 3.5.1006 X86 image
View ArticleRe: I have a trouble that I can't change Ethernet to Infiniband.
Yes, I installed MLNX_OFED_LINUX-3.2-2.0.0.0-ubuntu14.04-x86_64.iso.
View ArticleRe: I have a trouble that I can't change Ethernet to Infiniband.
can you try using mlxconfig? mlxconfig -d mlx4_0 s LINK_TYPE_P1=1
View ArticleClik here to view.
Re: I have a trouble that I can't change Ethernet to Infiniband.
Thank you! I changed to infiniband. Thank you, Sangmuk
View ArticleRe: I need driver for IBM Flex System EN4132 2-port 10Gb 90Y3468
It's under Lenovo downloads: http://www.mellanox.com/downloads/firmware/fw-ConnectX3-rel-2_34_5000-90Y3468_A4-A9_Bx-FlexBoot-3.4.521-UEFI-14.7.24.bin…
View ArticleRe: Mellanox Technologies MT26468 [ConnectX EN 10GigE, PCIe 2.0 5GT/s...
Hi, is there anybody from mellanox out there which can give me an answer if there is a driver for Xenserver 6.5 for the following adapter:"MT26468 [ConnectX EN 10GigE, PCIe 2.0 5GT/s Virtualization+]...
View ArticleRe: ib_send_bw performance puzzle
I had a similar problem with FDR and two adapters being available at the system level.. try to 'disable' one of the adapters, you can do that with: # lspci | grep Mellanox --> obtain the ID...
View ArticleClik here to view.
Re: Problems getting ISER working under Ubuntu 15.10
Hi Peter,UB15.10 is supported in MLNX_OFED and so does iSER.As Sopie mentioned there is a need to add support to iSER target (ib_isert) for this platform as mentioned in the release notes.TGT is a user...
View ArticleClik here to view.
I can't ping between two Windows 2008 R2 servers
Both servers have Conectx-2 Ethernet cards running driver version 5.10.11345.0 and firmware version 2.9.1000Both cards are up, and on line according to windows.Cards are addresses at 10.10.10.1 and 2...
View ArticleClik here to view.
Re: I can't ping between two Windows 2008 R2 servers
Hi Robert, Connectx-2 are not supported in the latest 5.10 GA version.Please review the WinOF 5.10 Release Notes to find which NICs and FW version are supported in this version. Thanks,Ronen L.
View ArticleHow to configure IPv6 routing on SX1000 switches
We got an SX1012 switch and a couple of NICs to interconnect our servers.The switch is claimed to have "Static Routes v4v6" as one of its L3 features.However, I could not yet find out how to configure...
View ArticleRe: How to configure IPv6 routing on SX1000 switches
To be more precise: I want to configure IPv6 routing between VLAN interfaces. I was able to do it for IPv4, but not for IPv6. The expected subcommands are simply missing. :-(
View ArticleRe: How to configure IPv6 routing on SX1000 switches
Update: our german dealer provided me with a new software image. But the problem still exists: m1 [standalone: master] (config) # show version Product name: MLNX-OSProduct release: 3.5.1006Build...
View ArticleRe: I can't ping between two Windows 2008 R2 servers
fixed by turning on network discovery
View ArticleClik here to view.
Re: How to configure IPv6 routing on SX1000 switches
Hi Frank, Reading the MLNX-OS UM at : http://www.mellanox.com/related-docs/prod_management_software/MLNX-OS_VPI_v3_5_1006_UM.pdf basically open a case at support@mellanox.com and they will provide...
View ArticleClik here to view.
Re: Joining + Leaving multicast group leads to hanging on ib_close_al
Actually the application does not infinitely hang on ib_close_al as described above - it timeouts in a minute or so.
View ArticleSetup SX1012 without serial
I need to setup a SX102 for the first time. The delivered cable is from RJ45 to serial, but my laptop doesn't have any serial ports. Can I do the first configuration with a Cisco RJ45 Console Cable or...
View Article