Re: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Running 2.10.4700, was not able to upgrade the firmware - when I run mlxburn it says it don't have the configuration for it (brc/ini). I think I also have a problem with the switch now... =/ .. The...
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
just out of curiasity, why are you looking to change the boudrate? what's wrong with the default?
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
see if this post helps:How to change ConnectX-2/3 VPI port type It might be that you have a VPI card that is set to work in Ethernet mode. try to flip it over to IB.
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
wow..Getting there ... now I have the cards seeing each other ... but some are in FDR10 mode.. how do I set this ones to FDR ?
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
I don't want to change boudrate to non default value 38400.Recover the deleted boudrate to default value 38400 and another parameter value, too...That's the last method to factory-default reset via...
View Article4036 IPoIB partition on vSphere 5.1U1
I have a Mellanox 4036 QDR switch.My QDR one doesn't have CLI for partition management. I make a partition.conf file and import to switch then restart SM on switch. But Just only 2 partitions 0 and 21...
View ArticleRe: Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
Hmmm, so it seems like "printenv" shows the environment variables, "setenv" is used for setting them, and "saveenv" (hopefully) saves them to flash. It doesn't seem to list an explicit way to delete...
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
here we go! now we are getting somewhere! can you please post the output of ibstat command (or ibv_devinfo)who did you buy those cards from (once you tell me that, i will tell you if you are able to...
View ArticleClik here to view.
Re: Getting transceiver info in Linux
Hi Johnny, Can you please open a case with Mellanox by, sending the issue to support@mellanox.com?Also please rollback on the changes you have done: # mv /usr/share/ibdiagnet2.1.1...
View ArticleRe: Problem driving MCX353A-FCBT with OFED3.5 on Fedora16
Jae-Hoon Choi - That's a good tip about the "[EC] Engineering changes: A4". I didn't know that. Just tried it here on my old cards, and it works for them too.
View ArticleRe: Getting eIPoIB to work ?
Iliyas Aiyub - Ugh, that sounds like a bug. It might be worth explicitly emailing the Mellanox support team (support@mellanox.com) to let them know about it. (Eddie S - That's the correct approach...
View ArticleRe: Getting eIPoIB to work ?
Hi Justin,CentOS 6.3 is in the accepted OS. As well it gets mentioned in the release notes as compatible OS. I have already created a case, so I'll see what I get there.
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
=> setenv baudrate=38400=> saveenv=> printenv ------> disappear baudrate=38400 * If you reboot switch via reset command you can't see any message....IOI => setenv baudrate 38400=>...
View ArticleRe: VM Passthrough of MHQH19B-XTR
Hi xlx01,Can you try the (intermediate) FW 2.9.8350 from:http://www.mellanox.com/page/custom_firmware_table and let us know if it solves the problem.
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Ok. All that's left to do now is make the corrupted 9024D-M environment the same as the good one isn't it? The "bootcmd" variable looks both different and important. It uses spaces in the value, which...
View ArticleRe: Re: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Great !! All adapters are in FDR mode and with latest drivers now!! \o/ .. worked with "flint -d /dev/.../..._cr0 dc" and after that mlxburn.
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Excellent. Now you're ready to rock and roll.
View ArticleRe: VM Passthrough of MHQH19B-XTR
2.9.1200 is released on 07-May-12 whereas 2.9.8350 is released on 07-Dec-11? In addition 2.9.1200 release notes mentions 2 bugs fixed: "PCIe FunctionLevelReset occasionally failed when the driver was...
View ArticleClik here to view.
Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
You are correct.... But I don't have any idea what can I do... This problem was originated my confused factory-default reset procedure.I'll drop the corrupted 9024D-M except PSU, Fan modules. I'll...
View Article