Clik here to view.
Re: Connect-X 3 cards on RHEL 5.3
One more thing under the "Supported HCAs" section of the OFED 1.5.2 release notes, Connect-X IB is listed as a supported HCA but there is no explicit mention of Connect-X 3, will it still work ?
View ArticleEffective-cost for devices
Hi guys I working on a project, and I need to know the next: 1. the effective cost of a switch: the price of a given switch is based on the number of ports? or the switching elements that composes it?...
View ArticleLooking for mellanox 10GbE drivers on VMware ESXi 5.5
Looking for mellanox 10GbE drivers on VMware ESXi 5.5The computer is a Ploliant HP BL460cThank you.
View ArticleRe: InfiniBand OFED Driver for VMware vSphere 5.X Now Available
Hello Brian.in my case these drivers does not worked. I am running vmware ESXi 5.5 do you know a success similar case? thanks
View ArticleRe: Re: Mellanox Technologies MT25204 [InfiniHost III Lx HCA] can't working...
Had the same problem here. We had to go back to 6.3 because the newer kernel on 6.4 and beyond is not supported by the Mellanox RPMs for this chip since they dropped support for the 1.5x series of FW....
View ArticleRe: InfiniBand OFED Driver for VMware vSphere 5.X Now Available
See here:http://community.mellanox.com/docs/DOC-1332#comment-1187 In short: uninstall drivers that came with ESXi 5.5, install "old" 1.8.2 drivers from Mellanox.
View Articlecompat-rdma-3.5 build problem on el6.4+3.11.5 kernel
snippets of seemingly relevant info from output file:Applying patches for 3.1 kernel:/var/tmp/OFED_topdir/BUILD/compat-rdma-3.5/backports/3.1 no such directoryCreated configure.mk.kernel:# Current...
View ArticleClik here to view.
ib_srp disconnect on ESXi 5.0 with H:0x5 D:0x0 P:0x0 error
Hello everyone, I'm using the 1.8.2.0 for ESXi 5.X ib_srp drivers with the ESXi 5.0.0 1311175 servers and every couple of days one of my initiators is disconnected from the storage with an error...
View ArticleClik here to view.
Problems on ARM platform
I'm trying to use Mellanox Infiniband adapter with SECO GPU DevKit on NVIDIA CARMA platform. To PCI slot of SECO CARMA board I had connected Netstor NA255A expansion box and assembled Infiniband...
View ArticleAny success with OFED 2.0-3.0.0 on RHEL 6.5/CentOS 6.5?
Looks like there are quite large changes between RHEL 6.4 / 6.5 kernels. Has anyone had success with OFED 2.0-3.0.0? Thought I'd ask before tackling the beast... Thanks! - Anthony
View Articlecompat-rdma-3.5 build problem on el6.4+3.11.5 kernel
(repost - can't figure out where to post this) snippets of seemingly relevant info from output file:Applying patches for 3.1 kernel:/var/tmp/OFED_topdir/BUILD/compat-rdma-3.5/backports/3.1 no such...
View ArticleVoltaire ISR 9024 Console Cable
I just upgraded from an SDR flextronics switch to an ISR9024M switch, and I don't have a console cable with it. It has a mini-usb connection on the front, can I just use a normal mini USB cable? or...
View ArticleClik here to view.
Re: Any success with OFED 2.0-3.0.0 on RHEL 6.5/CentOS 6.5?
I just tried it, but got the result "not supported on Centos_6.5", when trying to build the RPM's. So stuck with the non-Mellanox packages. Correction: I found the answer to my question below at...
View ArticleDoes ConnectX-3 support Amphenol's QSFP+ transceiver?
I want to get cable info, all data of which aren't correct, when I plug AMPHENOL's QSFP+ transceiver in.But when I plug MOLEX's QSFP transceiver in, I can get the correct info. Send PacketReceive...
View ArticleRe: ib_srp disconnect on ESXi 5.0 with H:0x5 D:0x0 P:0x0 error
Hi, Can you please increase the verbosity level and upload the logs.
View ArticleRe: ib_srp disconnect on ESXi 5.0 with H:0x5 D:0x0 P:0x0 error
Hi xgrv,Required parameter :#esxcli system module parameters set -m="ib_srp" -p "debug_level=2"On issue reproduce kindly attach vmkernel.log
View ArticleMOFED support for Intel Phi
Hello, I was wondering if the Mellanox OFED offers any support for the Intel Phi coprocessor. I noticed that the MPSS (the S/W stack of Phi) requires the stock OFED 1.5.4.1 only. They have added...
View ArticleRe: Minimize congestion - Do I need UFM ?
Anyone please ? Question is simple : Do I need UFM in order tominimize congestion or it can be done with MNLX-OS?
View ArticleClik here to view.
Re: Minimize congestion - Do I need UFM ?
Hi,UFM can help you find the congestion and trigger event upon them. Once you understand the probelm, you can take actions to clear the problem.MLNX-OS on the switch doesn't do it. It is a softeware...
View ArticleClik here to view.
Re: Minimize congestion - Do I need UFM ?
Thank you for your response. I think It is clear now. Αποστολή από κινητό Samsung
View Article