Re: Scientific Linux 6.4 errors with mlnxofedinstall & mlnx_add_kernel_support
coanda, you are correct - when installing different kernel you have to have all corresponding kernel rpms (devel, firmware, headers) for that kernel to be able to rebuild MOFED (using add_kernel...
View ArticleRe: Scientific Linux 6.4 errors with mlnxofedinstall & mlnx_add_kernel_support
thanks , so this iso is installable on Scientific Linux. I am familiar with the issues you speak of. I will investigate and install matching kernel devel firmware & headers. Thanks for...
View ArticleClik here to view.
mlnx_en-2.0-3.0.0 installation
Hi, I tried to install mlnx_en-2.0-3.0.0 onto my OpenSUSE 12.X (Kernel 3.7.10) system for running the Mellanox ConnectX adapter.After I extracted the files, I ran "install.sh" and it failed. The log...
View ArticleRe: Scientific Linux 6.4 errors with mlnxofedinstall & mlnx_add_kernel_support
Thread update / notes. Issue is still open: 1) The system (2.6.32-431.1.2.el6) I am using has matching kernel, devel, firmware and hearers.This was verified with "yum list kernel*", which...
View ArticleClik here to view.
Re: xenserver 6.2 LVMoISER
Open-iscsi version from xenserver6.2 install iso. The Iser interface option is part of it.[ XX] Loading iSCSI transport class v2.0-870.[ XX] iscsi: registered transport (iser)[ XX] iscsi: registered...
View ArticleRe: MOFED support for Intel Phi
Hi Andre, thanks for the reply. I think now that clusters with both Nvidia GPUs and Intel coprocessors and use Mellanox IB gear are getting more common, a unified (M)OFED to use that supports both and...
View ArticleOFED-MIC 3.5.1
I've heard that OFED-MIC 3.5.x will be supporting Intel Phi (MIC). Does Mellanox have any plans to work with this particular OFD version? We do have a need to support BOTH Nvidia GPUs and Intel MICs on...
View ArticleRe: Re: mlnx_en-2.0-3.0.0 installation
Hi Andre, Thanks for the info. The installation process appears it was trying to rebuild the installation package. If things were configured properly, then there shouldn't any issue and the platform I...
View ArticleRe: Scientific Linux 6.4 errors with mlnxofedinstall & mlnx_add_kernel_support
I had to switch my grub configuration to boot 2.6.32-358, the differences in the 2.6.32-431 headers are what cause the duplicate errors. But, if as you said, you've done this on a fresh 2.6.32-358...
View ArticleRe: Scientific Linux 6.4 errors with mlnxofedinstall & mlnx_add_kernel_support
My uname and header paths all look good for both systems 431 and fresh 358. I am suspicious there is issues with ScientificLinux and all will work fine with CentOS. I am going to test the same...
View ArticleRe: xenserver 6.2 LVMoISER
Are you sure iser transport is created on target login? There is no iser modules within XS open-iscsi, so whilst the kernel modules loads, open-iscsi has no means to make a connection over iser. Can...
View ArticleClik here to view.
Re: xenserver 6.2 LVMoISER
I'm at home and could not login from here.By the way my english is bad... sorry. Openiscsi - iscsid, iscsiadm - base Xenserver install.....!!!!! xenserverkernel6.2 added by script - save as tgz -...
View ArticleRe: ib_srp disconnect on ESXi 5.0 with H:0x5 D:0x0 P:0x0 error
Hi!This is my vSphere 5.5 configurations. -------------------------------esxcli system module parameters set -m=ib_ipoib -p="ipoib_recvq_size=1024 ipoib_sendq_size=1024 ipoib_mac_type=0"esxcli system...
View ArticleClik here to view.
Re: ib_srp disconnect on ESXi 5.0 with H:0x5 D:0x0 P:0x0 error
Hello Jae-Hoon Choi Yours ib_ipoib and mlx4_core are identical to mine, I'll check with the different max_vmhbas and default srp_sg_tablesize as you suggested. Thanks!
View ArticleClik here to view.
Re: Esxi drivers
Hi Ali +1 from me.We use Mellanox IB cards since several years and I am also missing the feature "multiple ipoib uplinks".The main reason is the isolation of traffic. We don't like portgroups for vms...
View ArticleClik here to view.
Cannot direct ping between two ConnectX-3 cards
Hi, I have two ConnectX-3 FDR Infiniband + 40Gige cards in separate machine where both are directly connected (Machine A:Port 1 Machine B:port 2). Both machine is equip with Ubuntu 12.04. I am actually...
View ArticleRe: ConnectX®-3 EN vs Ubuntu 13.04
Hi,I have reviewed the supported OS in the EN driver, and Ubuntu is not supported, you can see the full list:Mellanox TechnologiesMellanox OFED supports Ubuntu 12.04, I noticed you're using 13.04, so...
View ArticleRe: ports active but LEDs not lighting up
Hi,Do you know the Firmware version of the switch?How to perform remotely-managed switch firmware query:1.1) Install MFT (Mellanox firmware tools) on a host connected to the same fabric as the remotely...
View ArticleRe: fca_managerd fail and SRP error
Hi Roy,I would first check the status of the Infiniband fabric. Please enter to the host and perform the following commands:1.ibstat2.ibv_devinfo3.sminfo if you could provide that output
View Article