Re: Scientific Linux 6.4 errors with mlnxofedinstall & mlnx_add_kernel_support
Update: There is a new ISO & TGZ, MLNX_OFED_LINUX-2.1-1.0.0-rhel6.5-x86_64 This ISO will install on CentOS and Scientific Linux with the latest kernel update, 431 Although I have discovered...
View ArticleClik here to view.
XenServer 6.1 and IPoIB
Hi all! I have some problems to get working IPoIB in XenServer environment. Hardware: IBM BladeCenter H with VOLTAIRE 40 GB (QDR) INFINIBAND SWITCH MODULEIBM HS22 blades with Mellanox 40Gb/s QDR...
View ArticleInfiniband driver for Windows7 Professonal
Is there any nfiniband driver for Window7 Professonal. I plan to setup some Infinband environment on Windows7 WorkStations.I search any information about infiniband and Windows7 on internet, but there...
View ArticleRe: el5.10 ofed build problem.
I only have kernel-devel and kernel-headers for 2.6.18-371.1.2.el5 installed, so I don't think there's a conflict between different kernels I have installed. The problem looks like in...
View ArticleClik here to view.
Re: el5.10 ofed build problem.
If you remove the conflicting definition of netif_is_bond_slave from ofa_kernel-1.5.3 (I actually created a kernel_addons/backpoint/2.6.18-EL5.10 directory and modified config.mk) it will build OK....
View ArticleIS5023 compatibility question
Hi, recently I got the IS5023 switch and since I was unable to find an adapters and cables compatibility informationI decided to ask few questions here. Q1: Should CX313A or CX353A adapters work with...
View ArticleRe: Suggestions for *quiet* Infiniband switch?
Hi!If your SilverStorm has a SM... You can enable them and just connect with CX4 DDR cable between both switch. Then you can use ISR 9024D and update that's firmware via IB connection...:)
View ArticleRe: mlx4_vnic
Some strange things with releases.In 2.0-2.0.5 for ubuntu there wasn't vnic, but it appeared and worked "from the box" in 2.0-3.0.0 (worked with bridge 5020). But in 2.0-3.0.0 ib# interfaces were...
View ArticleClik here to view.
ConnectX-3 serial number
Hello.I have a remote server with ConnectX-3 card installed, and need to get card serial number. Google shown there are two ways - one is using lspci -vvv in Linux, other is physically looking at the...
View ArticleEnabling srv_io on MLNX MT27500 Connectx-3?
Hello, I am a newbie to IB, pardon if the question is silly. I'm trying to enable SRV_io in my IB card on RHEL 6.4. It doesn't seem to be working. Here's what I did: 1) burned a new firmware - the only...
View ArticleRe: Enabling srv_io on MLNX MT27500 Connectx-3?
Hi Pablo,See below this procedure and try it.Which OFED version do you have?What is the FW version on the card? http://community.mellanox.com/docs/DOC-1317 Ophir.
View Articleeth_ipoib not creating ethX
Hi, I've discovered some behavior which I feel is a bug. Under 12.04.3 I installed OFED 2.1-1.0.0-ubuntu12.04, enabled the eth_ipoib module in /etc/infiniband/openib.conf absolutely no problems, the...
View ArticleRe: Enabling srv_io on MLNX MT27500 Connectx-3?
Thanks Ophir! The fw version is 2.30.8000. I don't have OFED installed, actually that is one of my newbie questions - do I need to install OFED and its kernel module (mlnx_en?) Or is it possible to use...
View ArticleRe: Enabling srv_io on MLNX MT27500 Connectx-3?
Hi PabloYou have to install the latest MLNX_OFED let me know if it works,Ophir.
View ArticleRe: Enabling srv_io on MLNX MT27500 Connectx-3?
Thanks for the help Ophir, I will do that, but I'm sure it will work so marking the question answered.
View ArticleOFED 3.5-2 compile fails - Failed to build compat-rdma RPM
Hello! Newbie with IB here - I'm trying to install OFED on RHEL based systems and it's not quite working out. I've tried it on RHEL 6.4, 6.2 as well as a proprietary kernel based on RHEL 6.4 (compiling...
View ArticleClik here to view.
Re: OFED 3.5-2 compile fails - Failed to build compat-rdma RPM
Also I see from the release notes that the *supported* kernels are: o Linux Operating Systems: - RedHat EL6.2 2.6.32-220.el6 - RedHat EL6.3...
View ArticleConnect-IB on RHEL6
Hello, Does anyone know about this BUG?https://bugzilla.redhat.com/show_bug.cgi?id=1023439 Thanks,HK.
View ArticleIB driver load failure on VM
We are having issues with assigning VF of the Mellanox Infiniband SR-IOV card to a KVM VM. The driver load on the VM side fails. Do we need to specifically configure anything for this ?
View Article