Network Direct Programmers Guide from Microsoft
Great resource for Windows Development: http://msdn.microsoft.com/en-us/library/cc904397%28v=vs.85%29.aspx
View ArticleA few questions about InfiniBand cards
Dear All: I set up two servers are interconnected, one of which is Windows 7(64 bits) operating system, the other is Windows Server 2008-R2(64 bits). My question is as follows: 1. In sock...
View ArticleRe: InfiniBand: Mellanox Technologies MT25208 [InfiniHost III Ex] (rev a0) vs...
Hey all, Just to let everyone know and to close this one off I resolved the issue. Originally I flashed both the Mellanox cx4 and the cisco variants with the same firmware for cards with PID...
View ArticleClik here to view.
Cable Recommendation For ConnectX-3 Dual Port 10Gb with SR Optics and Cisco...
Hello,It is my intention to connect several Connect X3 Dual Port 10Gb cards (OEM through new Dell Servers) to Cisco 2960-X switches using Cisco's SFP+ transceivers (SFP-10G-SR). I see that testing has...
View ArticleRe: Please nuke this idiot...
Likely this user as well (created at the same time, and claiming to be from the same "mojobox" company) The specified item was not found.
View ArticlePlease nuke this spammer...
The specified item was not found. Just saying... (I tried sending a message directly to Cecilia atm, but messaging seems to have been disabled for now)
View ArticleRe: How Do I change the port mode on an MHGH28-XTC
Yeah, these cards can definitely do 10GbE. On EL6/7 (eg RHEL/CentOS/SL) there is a config file - plain ascii - that you change. In the config file you set the mode for each port. I don't remember the...
View ArticleRe: I need firmware version 2.9.1000 but the cards have 2.9.1050
Out of curiosity, which model cards are you using?
View ArticleRe: Receive Side Scaling
Seems a bit weird. Have you looked through the Red Hat Knowledge base for relevant info?
View ArticleRe: Getting following error on RHEL-5.8 and MLNX_OFED_LINUX-1.5.3-3.0.0
HI Einav, I will try workaround and get back to you. Thanks,Rupesh.
View ArticleClik here to view.
Re: Does MLNX_OFED also support FreeBSD?
As a general thought, there is a FreeBSD Infiniband mailing list which may also be useful: The freebsd-infiniband Archives
View ArticleiSER support in Windows and Solaris environment with Mellanox MT26448 Card
Hello,Whether Windows and Solaris has the iSER support with Mellanox MT26448 card?Thanks,Anil
View ArticleRe: Please nuke this spammer...
New ones: The specified item was not found.The specified item was not found. (both from same new user)
View ArticleCable Options (MCX354A-FCBT-LOW P)
Recently given 2 of these adaptors and would like to use them to learn about the practicalities of Infiniband and the Mellanox product capabilities.What would be my best choice of cable for a home lab...
View ArticleMXM - only up to 2 devices are supported?
Hello, I recently installed a test system that utilizes multirail Infiniband. It consists of two fat nodes, each with four Xeon E5-4650's. Each CPU has got a ConnectX-2 card directly attached. The...
View ArticleClik here to view.
Re: Please nuke this spammer...
Hi Justin,I will check if we can just block the domain. Ophir.
View ArticleRe: MXM - only up to 2 devices are supported?
Only two devices can be used at the same time. Try to add "-x MXM_IB_PORTS=mlx4_N", just replace N, to mpirun command line and see if it improves results.
View Article