Trying to download UFM software, unable to find the good link (I do not want...
Hello, I am trying to download UFM software (I have 3 sets of UFM Ha servers with their licenses) and want to upgrade them to 4.8, but cannot find the good link on the web site Regards Eric Mena
View ArticleRe: ESXi 5.5 & IB Dual Port Card card showing just a sinlge vmnic
It seems that your HCA is ConnectX-1. If you want to use it for test you must disable Intel VT-d on your BIOS and you can use it with latest VPI driver...:)
View ArticleRe: ESXi 5.5 & IB Dual Port Card card showing just a sinlge vmnic
I mean, my primary is to goal to understand why on HCA is showing just a single interface instead of two, I'm not sure if this has anything to do with the driver? You are talking about the VPI driver,...
View Articlehow to change the port type from IB port to RoCE port?
I am trying to use ConnectX-3Pro cards (MCX354A-FCCT), and OFED on my system is recognizing it as IB cards. How can I change it to RoCE cards?
View ArticleRe: how to change the port type from IB port to RoCE port?
Hi Anil,The procedure is here HowTo Change Port Type in Mellanox ConnectX-3 Adapter
View ArticleRe: ESXi 5.5 & IB Dual Port Card card showing just a sinlge vmnic
Hi I need to obtain the FW version next week.However it's a switch less, direct connected environment with just two ESXi Hosts (Dell R710). Patrick
View ArticleRe: ESXi 5.5 & IB Dual Port Card card showing just a sinlge vmnic
Can you describ your HCA's firmware version? Ethernet driver has a some issue with pseudo device on 2nd port.
View ArticleRe: ESXi 5.5 & IB Dual Port Card card showing just a sinlge vmnic
Dropping by to mention and ask a few things : 1.Regarding the weird naming for the 2nd port. The problem is that the VMware ESX device naming mechanism is not handling nicely the fact that the Mellanox...
View ArticleRe: Trying to download UFM software, unable to find the good link (I do not...
Hi Eric, They're accessible through the license portal with your dedicated username and password : License Management and Download Portal if you can't recall what they are, please contact Mellanox...
View ArticleRe: Trying to download UFM software, unable to find the good link (I do not...
Hello, I know, but there was an issue with at least one link (see ticket Mellanox support case # 00162113). Regards Eric
View ArticleRe: ConnectX-2 EN and SR-IOV on ESXi 5.5
Hi, It is in beta stages, I do not think it is going to be GA on ConnectX-2 adapters or going to be in the support matrix, but things might change. To enable it you will need to modify your firmware...
View ArticleRe: Cable Options (MCX354A-FCBT-LOW P)
For 56Gb on Infiniband you only need a switch that supports FDR, as in the 6XXX series. For 56Gb Ethernet you will need a license that enables 56GB, look at this helpful post : HowTo Configure 56GbE...
View ArticleRe: Windows Server 2008 poor performance
Hi, I suggest you start by reading the Windows section under the performance tuning guide : http://www.mellanox.com/related-docs/prod_software/Performance_Tuning_Guide_for_Mellanox_Network_Adapters.pdf...
View ArticleRe: Voltaire 2004 User Manual
Looks like it is in the Mellanox support portal under the EOL Switches section : https://mymellanox.force.com/support/SupportProductItem?id=a2v50000000XdSkAAK I see the manuals and software image in...
View ArticleRe: Can not activate VF in virtual machine
Hi, What Firmware is burned on this specific HCA ? you can query it with flint : flint -d /dev/mst/mtXXXX_pciconf0 q
View ArticleRe: ESXi 5.5 & IB Dual Port Card card showing just a sinlge vmnic
Hi Guys ~ # esxcli network nic listName PCI Device Driver Link Speed Duplex MAC Address MTU Description------ ------------- ------- ---- ----- ------ ----------------- ----...
View ArticleRe: Voltaire 2004 User Manual
Thank you Erez, however I don't have a login for that site. How do I go about getting one?
View ArticleCan I do L3, IP networking, without extra LICENSE / UPGRADE with SX1036???...
Hello, I want to buy 2 switches that will give me 40gbe converged Ethernet abilities. I am looking at the SX1036, and I am a bit confused about the L3/GW Licenses. My question; If I am not planning on...
View ArticleRe: how spread my net bandwidth when I used Send / receive or read / write...
Hi, I would suggest confirming;If your machines meet the requirements that bring out the best ability of the adapters (ConnectX-3 requires at least PCIe 3.0 w/ 8 Lanes for the best capability).If the...
View ArticleRe: Query on mellanox ml2 mechanism driver
Nurit/Nishant,Do we still need "pci_alias" configuration with Juno release ? I guess not.Thanks
View Article