Hi Ali,
Thanks for the response.
“FW version:” Currently: 2.9.1000 for the ConnectX2 VPI’s and 2.11.0500 for the ConnectX3 VPI’s.
“Windows VM driver version:” Windows 2008 R2 x64 – OFED 3.2.0 – VM Version 9 (I have tried each OFED software package which correlated to the proper firmware going back for ~2 years at this point).
“Can you please try Linux VM and let us if it works (I know that Linux VM works in the lab, so we can have same reference point):” Initially I tried Linux (~2 years back) the drivers wouldn’t detect/enable properly and moved to windows as figured the driver support would be better as is usually the case with hardware vendors…I can certainly try again. Can you provide me your Linux Distribution/Version your lab uses? If we are comparing things as close to apples to apples, this would be beneficial.
On a side note, I feel like your lab should have windows Directpath Test system, as it would be trivial to maintain this. I am itching to try some HyperV/SMB3.0 when I get some more time, and doing so completely virtually would make things much easier.
thank you