Hi, I have a setup with a Mellanox SX1036 Ethernet switch and 2 servers, each with Mellanox ConnectX-2 HCA cards. Each HCA card has one of its (Ethernet) network ports connected to a port on the SX1036 switch, and are configured to 10 Gbps -- links are up and running. I'd like to use "iperf" to do some network performance testing. So, I've installed iperf on both servers and am ready to go. I was hoping that someone could point me to good examples of using "iperf" with a similar setup, i.e. servers with Mellanox HCAs communicating through a Mellanox switch. Thanks!
↧