Clik here to view.
Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
Hi!I'm also tried with WinMFT via spark.exe Below is result this picture shows to me that only all boot sections were normal. Another command "spark -d lid-7 swreset" was executed perfectly! Below is...
View ArticleRe: Can ping but not connect to ports using infiniband
One more thing to pay attention to Jon,if you take two machines and connect then one to each other using both ports of each HCA AND have a switch in between this is all consider as "one IB...
View ArticleRe: ConnectX-2: Enabling RSS (Receive Side Scaling) in IPoIB mode
UDP hardware queues work in ConnectX-2, but there are more flow steering / RSS features in ConnectX-3.
View ArticleRe: Mellanox positioning in the IB market?
Copying my Linkedin response Henry, let me address your questions by adding comments below your questions: Would you please share your secrete of success in InfiniBand Market? >>> We are...
View ArticleRe: help for ibping and ibv_rc_pingpong over switchless configuration
Perhaps remove the second port all together, and/or restart 1 of the SMs to run more than 1 instance: OpenSM Multiple instances: opensm(8) - Linux man page-g, --guid<GUID in hex> This option...
View ArticleRe: Mellanox positioning in the IB market?
Saluting J. Margolis, When do you think Mellanox stock price will be back to its peak last year? Thanks & Happy Memory Day w/e Henry
View ArticleRe: ConnectX-2: Enabling RSS (Receive Side Scaling) in IPoIB mode
MOFED 2.0 includes IPoIB RSS support for datagram mode. Try to upgrade your software to MOFED 2.0, then check your CPU utilization when running IPoIB datagram (echo datagram > /sys/class/net/ibX/mode).
View ArticleClik here to view.
Re: MHGH28-XTC not working
Like I said newbie when it comes to routing / ip forwarding how would I get that to work?
View ArticleClik here to view.
Very stupid MHGH28-XTC question
Hi Can you load an Ethernet driver for these cards? I've bought a couple of Sun badged ones and flashed them back to Mellanox firmware. As an IB card it looks fine but I really wanted Ethernet...
View ArticleRe: Very stupid MHGH28-XTC question
You need the ConnectX3 Cards for the right firmware to work on Server 2012. The ConnectX2 cards are not supported. Mike
View ArticleClik here to view.
Re: Very stupid MHGH28-XTC question
Thanks for the reply. Of course, not supported does not necessarily mean it won't work i.e. I've got a few Connect X MNEH cards working perfectly fine in Windows 2012. Anyway, are you saying that...
View ArticleRe: Very stupid MHGH28-XTC question
Some of the ConnectX Cards will work, it depends on the firmware, but they are not supported for Windows 2012. Some of the RDMA features won't/don't work. I have not used them with Windows Server...
View ArticleRe: ConnectX-2: Enabling RSS (Receive Side Scaling) in IPoIB mode
Have you looked at SDP to just not use tcp all together? Has worked great for me a year or two ago
View ArticleRe: ConnectX-2: Enabling RSS (Receive Side Scaling) in IPoIB mode
We have and it's a lot faster, but I don't see how using SDP on a router that forwards IP traffic would work.
View ArticleClik here to view.
Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
Hi~ I'm finding another ISR9024D-M on somewhere. I'm also change to IB firmware working platform to CentOS.After some work proceed some error was corrected and below is result. Most big problem is...
View ArticleClik here to view.
Re: Very stupid MHGH28-XTC question
Hi Mike, Thanks but kind of know all you've posted already. I'll see what happens on Windows 28kr2 / Centos I guess. ThanksDrew
View ArticleRe: Very stupid MHGH28-XTC question
Hi~ If you have a ConnectX-2 VPI firmware above 2.9.8350 then you can use it!If Mellanox support ConnectX-2 EN INTERIM firmware you can use it on WS2k12. Good luck!
View ArticleClik here to view.
Re: Mellanox positioning in the IB market?
Henry, in regards to stock price, we can't comment on such matters.
View ArticleCan anyone point me to a good example of using "iperf" with Mellanox Ethernet...
Hi, I have a setup with a Mellanox SX1036 Ethernet switch and 2 servers, each with Mellanox ConnectX-2 HCA cards. Each HCA card has one of its (Ethernet) network ports connected to a port on the SX1036...
View Article