Re: unable to change link type from ib to Eth on Connectx4. mlxconfig -d /dev/mst/mt4115_pciconf0 set LINK_TYPE_P1=2 LINK_TYPE_P2=2 gives following error Device type: ConnectX4 PCI device: /dev/mst/mt4115_pciconf0 Configurations: Current

Thanks for the response

Yes I tried, I get the same error message.

I am not sure if the cable I am using is the one that is causing the issue. I will get a new cable and see if I can get to 100 gig on ETH link.

Anil