Ping failing with 10G MNPA19-XTR

Hi,

I have connected X86 point to point. Connected 10G Ethernet card both sides.  But it is failing to up the port. It is showing Link detected 'No'

The link status showing Down. I am not able to make active manually. Please check am I missing some information.

[root@localhost ~]# cat /etc/redhat-release

Red Hat Enterprise Linux Workstation release 7.0 (Maipo)

Kernel version:

[root@localhost ~]# uname -r

4.7.0-rc2

root@xhdipsnvme1 ~]# lsmod | grep mlx4_en

mlx4_en               106768  0

mlx4_core             282053  2 mlx4_en,mlx4_ib

mlx_compat              1561  18 rdma_cm,ib_cm,ib_sa,iw_cm,mlx4_en,mlx4_ib,mlx5_ib,ib_mad,ib_ucm,ib_netlink,ib_addr,ib_core,ib_umad,ib_uverbs,mlx4_core,mlx5_core,rdma_ucm,ib_ipoib

[root@localhost ~]#  cat /sys/class/infiniband/mlx4_0/ports/1/link_layer

Ethernet

[root@localhost ~]#  cat /sys/class/infiniband/mlx4_0/ports/1/state

1: DOWN

[root@localhost ~]# ibv_devinfo
hca_id: mlx4_0
transport:   InfiniBand (0)
fw_ver:    2.9.1000
node_guid:   0002:c903:0051:5944
sys_image_guid:   0002:c903:0051:5944
vendor_id:   0x02c9
vendor_part_id:   26448
hw_ver:    0xB0
board_id:   MT_0F60110010
phys_port_cnt:   1
  port: 1
   state:   PORT_DOWN (1)
   max_mtu:  4096 (5)
   active_mtu:  1024 (3)
   sm_lid:   0
   port_lid:  0
   port_lmc:  0x00
   link_layer:  Ethernet