Clik here to view.
Re: Interface goes down during PXE Deployment
While it may not help you specifically with getting pixiecore up and running, the CX3Pro ships with iPXE as a boot rom -- it supports directly downloading the boot config, kernel and initrd over http....
View Articleping is not happening between MCX314A and MCX354A 40G Etherenet slots
I have connected two X86 machines with PCIe base 40 G MCX314A and MCX354A Ethernet cards. I am trying to point with point to point cable.I am not able to that one. I can able to find Ethernet ports...
View ArticleClik here to view.
How can I check ASIC version on my SX6036G
I saw a Ethernet Interface issue on your MLNXOS like below. How can I check ASIC revision?
View ArticleClik here to view.
Question about Dual SX6036G configurations on vSphere 6.0 Update 2
I made a tiny personal lab with 2 of SX6036G Gateway switches.During 1 month POC period later I have some questions below. Q1. Why ARP-Proxy mode enabled then IB SM was disabled?At first I think that...
View ArticleRe: Windows-Linux ConnectX-2 setup
Thanks for the reply! I got some downtime on the storage server to test and have two further clarifications/questions. - The WinOF version of ib_write_bw doesn't have the -R flag, and the -d flag only...
View ArticleRe: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Hi Jea-Hoon, Q1. Why ARP-Proxy mode enabled then IB SM was disabled? this is by design - SM can't run on the same switch where proxy-arp can run - this is documented in the MLNX-OS user manual Q2....
View ArticleRe: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Thank you for your quick exact reply...:) I know also default partition must be enable on fabric. But security reason I want to disable IPoIB function on default partition, not default partition...
View ArticleRe: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Hi, Try the below - I never tried it but it's available: switch(config)# no ib partition Default ipoib force
View ArticleClik here to view.
Re: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Okay!I tried your command via my iPhone with VPN.But force option wasn't accepted to MLNX-OS.I think if there is a modification on default partition then MLNX-OS apply the modification to all othere...
View ArticleClik here to view.
Re: ping is not happening between MCX314A and MCX354A 40G Etherenet slots
Hi!MCX354A is Infiniband HCA and MCX314A is Ethernet only Adapter.If you install Infiniband driver and MCX354A, you must change Ethernet mode then you will pining to MCX314A end-to-end connection...
View ArticleGetting this error in Oracle Linux 6.8 under /var/log/message || kernel:...
Hi Everyone, We are getting below error in one of physical server, Which makes the server inaccessible from remote because we getting disconnect frequently, Regarding this we have raised a SR with...
View ArticleFirmware number mismatch for...
Hi, I am trying to install a driver for DEL1090001019. When I install the firmware ( http://www.mellanox.com/downloads/firmware/fw-ConnectX3-rel-2_35_5100-01T7NW-Flexboot-3.4.648.bin.zip ) as...
View ArticleClik here to view.
Re: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Hi , I would suggest opening a support ticket with Mellanox support@mellanox.com
View ArticleRe: Atomics with EDR cards
Hello, Yes, it should contain userspace support for these functions. Please refer to the RDMA programming user manual :...
View ArticleRe: Firmware number mismatch for...
Hello Pedro, Could you please invoke ibstat or ibv_devinfo so we can see the current firmware version installed on your card? Thank you, Karen.
View ArticleRe: Above 4G issue
Not sure to what specific "....above 4G fix" you are referring but if you are pointing at InfiniBand ability to link under Windows, when MMIO is assign to above 4GB then basically, over native 64 bit...
View ArticleRe: Firmware number mismatch for...
In addition, there is a new firmware version available for your card 2.36.500 please test again with the new firmware:http://www.mellanox.com/page/firmware_table_dell?mtag=oem_firmware_download
View ArticleRe: Question about Dual SX6036G configurations on vSphere 6.0 Update 2
Unfortunately my 2 of SX6036G's warranty was out in last year.I always saw your PB before purchase your products.But always PB's function was beta or slowest driver support in historical.I will use...
View ArticleQSFP to SFP+ splitting and configuring IP addresses on subports
Hi, I have used a Mellanox QSFP to SFP+ splitting cable to split my QSFP interface to four SFP+ on my SX1012 switch. I want to know if its possible to assign an IP address on these sub ports (SFP+) on...
View ArticleRe: How to configure infiniband connectX-3 on to Kernel based Virtual Machine...
Do you get any error while adding virtual function device to VM? When VM is up and running, what can you see in 'lspci' output?
View Article